NB: If skin becomes pink during first treatment, this is quite normal and will disappear
after 30 minutes. repeat the treatment the following day. Successful treatment is
cumulative - the more you use the product, the better the results. DO NOT, however
exceed the maximum recommended use.
Facial Upper LIP (FACE PAD Mode)
➤ Thoroughly clean treatment area as before.
➤ Slide switch mode to OFF position.
➤ Insert lead into jack socket at
the end of
e-PEN.
➤ Carefully apply upper lip pad
so that it adheres to the skin.
➤ Place the second circular pad on
either upper arm.
➤ Carefully push the white lead clip onto
the button on the upper lip pad.
➤ Carefully push the green lead cap onto the circular pad.
➤ Slide the pad button to the FACE PAD position.
➤ The red power light illuminates to show power on. The green
conductivity light illuminates to show good conductivity.
One beep sounds, the first stage of 5 minute treatment begins.
➤ After 2.5 minutes the green LED light will flash to indicate 1 minute rest period.
➤ After 1 minute, the green LED light remains on and one beep sounds to
indicate 2nd stage of treatment (2.5 minutes).
➤ Three beeps will sound to indicate end of treatment and green LED light will go out.
Slide mode switch to
OFF.
➤ Remove hairs with e-PEN tweezers or if you prefer
your own tweezers.
➤ Carefully replace conductive pads onto the silicon backing sheet,
in order to preserve self-adhesive for next treatment.
Maximum Use: DO NOT EXCEED one treatment per day in one treatment area using
face pad. Maximum of 3 treatments per week in one treatment area.
10
• PROBE
• OFF
• FACE PAD
• BODY PAD
• PROBE
• OFF
• FACE PAD
• BODY PAD
• PROBE
• OFF
• FACE PAD
• BODY PAD
T IP: Slight tingling sensation? This can be
reduced with thorough cleansing of treatment area.
ePEN_Instruction6_04 6/16/04 1:55 PM Page 11
Comments to this Manuals